Canon imagePROGRAF iPF810 User Manual page 191

7.
A
In the Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
Make sure the paper you select is loaded in the printer.
Note
•
The paper type setting in the printer driver and related software (as well as on the Control Panel ) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).
8.
After conrming that
Note
•
For information on settings optimized for printing photos and images, see "Printing Photos and
Images". (→P.172)
•
You can check the settings values selected in the
9.
Access the Page Setup pane.
10.
Click Roll Paper in the
D
Easy Settings is selected, click Photo in the
A
Paper Source list.
E
Print Target list.
E
Print Target list by clicking
Working With Various Print Jobs 177
Printing Photos and Images
F
View set..