This Paper Cannot Be Used; Roll Printing Is Selected - Canon imagePROGRAF iPF810 User Manual

Insufcient paper for job
The printer has received a print job longer than the
amount of roll paper left when ManageRemainRoll
in the printer menu is On and one of the following
settings is selected.
•
During HP-GL/2 printing, GL2 Settings > Paper
Source in the printer menu is set to an option
other than Automatic.
•
The Media Take-up Unit is in use.
*When using the Media Take-up Unit, either hold down the Stop button for a second or more to cancel
printing or press the Online button to continue printing. However, if you continue printing, the roll paper
may run out during the print job and you may not be able to print all of the document.

This paper cannot be used.

Paper that is too large for the printer has been loaded. Lift the Release Lever and load paper of the correct
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.

Roll printing is selected.

You have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
Cause
Cause
Cause
Corrective Action
Press the Online button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Hold down the Stop button for a second or more to
cancel printing.
Either change the printer driver Paper Source setting
or the GL2 Settings > Paper Source setting in the
printer menu or replace the roll with a roll that has
enough paper for the print job, and then try printing
again.
If you are using the Media Take-up Unit, remove the
printed document from the Media Take-up Unit before
replacing the roll with a roll that has enough paper for
the print job, and then try printing again.
(→P.143)
(→P.139)
(→P.93)
Corrective Action
size.
(→P.130)
Lift the Release Lever and load paper of the correct
size.
(→P.130)
Lift the Release Lever and load unused paper A4
or larger. More than one sheet may be required
depending on the adjustment.
Corrective Action
Load a roll and try printing again.
To print on a sheet instead, hold down the Stop
button for more than a second to cancel printing, load
a sheet, and then print.
(→P.112)
Messages regarding paper
Error Message 663