Printing Performance - Canon imagePROGRAF iPF810 User Manual

Printer Specications

Printing performance

Print method
Maximum resolution
Printhead
Number of nozzles
*1: Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Interface
Expansion Board Slots
USB 2.0(*1)
Ethernet
IEEE 1394
*1: Use in USB 2.0 High Speed mode requires the following environment:
•
Computer: USB 2.0 High-Speed-compatible
•
Operating system: Windows Server 2003/Windows XP/Windows 2000 or Mac OS X 10.3.3 or later
•
USB 2.0 driver: Microsoft USB 2.0 driver (available from Windows Update or the Service Pack.)
•
USB cable: Certied USB 2.0 cable
100 Printer Parts
Bubblejet
2400 dpi horizontally (*1) × 1200 dpi vertically
PF-03
MBK: 5,120; others: 2,560 per color
1
Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Format Internal port
Specication IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX/Auto-Negotiation, IEEE 802.3x Full
Duplex
Protocols IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP, TCP/IP, AppleTalk,
HTTP
Format Optional board (compatible with the expansion slot)
Specication IEEE 1394-1995, conforms to P1394a Specication ver. 2.0,
half duplex, Data/Strb differential serial
Transfer speed 100/200/400 Mbps
Connector Conforms to IEEE 1394-1995 (6-pin), no power supply