Canon imagePROGRAF iPF810 User Manual page 103

13.
Making sure the roll paper is not slack, tape the left and right side of the leading edge to the
paper core.
Note
•
When rewinding heavyweight paper, use strong adhesive tape to fasten it.
14.
Press the Online button to bring the printer ofine, and then press ▼ on the Control Panel to
loosen the tension of the roll.
15.
On the Right Media Take-up Unit, pull the Rewind Mode Switch forward to turn it on. Press the
▼ button on the Media Take-up Unit to rewind the roll so that it is nearly taut.
Important
•
Rewind the paper so that the paper core makes at least two revolutions. If the paper is not rewound
two full revolutions, repeat steps 14 and 15.
•
Do not manually force the Rewind Spool or paper core to rotate them. This may damage them. To
rewind or unwind rolls, press ▲ or ▼ on the Media Take-up Unit.
Optional accessories
Printer Parts 89