Use Another Paper; Messages Regarding Printing Or Adjusment; Cannot Adjust Band; Cannot Adjust Printhead - Canon imagePROGRAF iPF605 User Manual

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot print as specied.
Press Load/Eject and replace paper with A4/LTR (vertical) or larger
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.
Press Load/Eject and replace roll with 10 in. wide or larger roll.
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.

Cannot adjust band.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.

Cannot adjust printhead.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
548 Error Message
Cause
Cause
Cause
Cause
Cause
For automatic Printhead adjustment, we recommend
using a type of paper that you often use, other than
lm.
(→P.453)
Adjust the feed amount manually.
(→P.461)
Corrective Action
Press the Load/Eject button and switch to paper A4/Letter,
vertical, or larger.
Corrective Action
Press the Load/Eject button and load a roll at least 10
inches (254 mm) wide.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.479)
2.
Clean the Printhead if the nozzles are clogged.
(→P.480)
Adjust the feed amount manually.
(→P.461)
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.479)
2.
Clean the Printhead if the nozzles are clogged.
(→P.480)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.453)
Corrective Action
Corrective Action
Corrective Action