Gl2 Settings - Canon imagePROGRAF iPF810 User Manual

Control Panel

GL2 Settings

Setting Item
Color Mode
Print Quality
Print (Economy)
Input Resolution
Paper Source
Conserve Paper
Line Cap
Smoothing
62 Printer Parts
Monochrome Print in monochrome.
Color (CAD) 1 * Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Color (CAD) 3 Print emulating the Canon BJ-W3000/W3050, in colors
resembling colors produced by these printers.(*1)
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors resembling
colors produced by these printers.(*1)
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors resembling
colors produced by this printer.(*1)
Color (CAD) 6 Print emulating the HP Designjet 4000/4500, in colors
resembling colors produced by these printers.(*1)
Choose the print quality.
Although printing quality is diminished, less ink is consumed
than in regular printing. Select On to conserve ink.
Choose the printer input resolution, 600dpi or 300dpi.
Choose the source of paper for HP-GL/2 printing.
Conserves paper when printing.
Choose the shape of the end point, determined by Software
or Rounded.
•
•
Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
•
Description, Instructions
If you choose Software
Operation is determined by the application. If nothing is
specied by the application, the result is as shown in the
gure.
If you choose Rounded
If you choose Software
Operation is determined by the application. If nothing is
specied by the application, the result is as shown in the
gure.
Note: By default, this is a 72-sided gure