Cannot Print Over A Netware Network; Cannot Print Over A Tcp/Ip Network - Canon imagePROGRAF iPF810 User Manual

Cannot print over a network

Cannot print over a TCP/IP network

The printer's IP address is not congured correctly.
The printer's TCP/IP network settings are not
congured correctly.
The computer you are trying to print from is not
congured correctly.

Cannot print over a NetWare network

The printer's NetWare settings are not congured
correctly.
The computer you are trying to print from is not
congured correctly.
The NetWare server and services are not congured
correctly.
646 Troubleshooting
Cause
Cause
Corrective Action
Make sure the printer's IP address is congured
correctly.
(→P.454)
(→P.455)
Make sure the printer's TCP/IP network settings are
congured correctly.
(→P.458)
Make sure the computer's TCP/IP network settings
are congured correctly.
(→P.466)
(→P.486)
Corrective Action
Make sure the printer's NetWare settings are
congured correctly. In particular, make sure a valid
frame type is selected.
(→P.461)
Make sure the computer's NetWare settings are
congured correctly.
(→P.478)
Check the following points.
1.
Make sure the NetWare le server is running.
2.
Make sure there is enough free disk space on the
NetWare le server. Insufcient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and conrm that
the print service is congured correctly and the
print queue is available.
4.
If data transmission to a printer on another subnet
fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify
"Other/Unknown" as the printer type.