Paper Loaded Askew - Canon imagePROGRAF iPF810 User Manual

Manually rewind the roll all the way and press OK.
A paper jam occurred when advancing the paper.

Paper loaded askew.

Paper is loaded askew.
Note
•
To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off
or Loose in the Skew Check Lv. setting of the printer menu. However, this may cause jams because
paper may be askew when it is printed. Also, the Platen may become soiled, which may soil the back of
the next document when it is printed.
Cause
Cause
Corrective Action
1.
Rewind paper on the Roll Holder manually, all the
way, and then press the OK button.
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Corrective Action
Follow these steps to reload the roll.
1.
Lift the Release Lever.
2.
Open the Top Cover.
3.
Adjust the right edge of the roll to make it parallel
to the right Paper Alignment Line.
4.
Lower the Release Lever.
5.
Close the Top Cover.
(→P.139)
If this error recurs after you reload the roll, remove
the Roll Holder from the printer, push the roll rmly in
until it touches the Roll Holder ange, and reload the
Roll Holder in the printer.
(→P.136)
Follow these step to reload a sheet.
1.
Lift the Release Lever.
2.
Open the Top Cover.
3.
Adjust the right edge of the sheet to make it
parallel to the right Paper Alignment Line and the
trailing edge of the sheet to make it parallel to the
paper alignment line under the Paper Retainer.
4.
Lower the Release Lever.
5.
Close the Top Cover.
(→P.164)
Messages regarding paper
Error Message 667