Gl2: W0502 The Parameter Is Out Of Range; Gl2: W0504 This Command Is Not Supported - Canon imagePROGRAF iPF810 User Manual

Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2.
The printer has received a HP-GL/2 print job that
cannot be printed on the paper that has been
advanced.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or
0904)
The printer memory became full while processing the
job received.

GL2: W0502 The parameter is out of range.

A parameter specied in a HP-GL/2 command is out
of the supported range.

GL2: W0504 This command is not supported.

The printer has received an unsupported HP-GL/2
command.
682 Error Message
Cause
Cause
Cause
Cause
Corrective Action
Follow these steps to replace the type of paper in
the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Replace the paper with a type compatible with
HP-GL/2. For details on paper compatible with
HP-GL/2, refer to the Paper Reference Guide.
(→P.125)
Press the Online button to resume printing. However,
note that this error may cause paper jams and affect
the printing quality.
Corrective Action
Check the print job and the printing results.
Corrective Action
Check the print job.
Corrective Action
Check the print job.