Paper Jam; Sheet Removed; Sheet Printing Is Selected; Lift The Release Lever - Canon imagePROGRAF iPF810 User Manual

Messages regarding paper

Sheet removed.

A sheet has come out of the printer during printing.

Sheet printing is selected.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.

Regular printing is selected, but a roll is loaded.

A print job for printing on sheets was sent when a
roll is loaded.
You are using a roll with the Media Take-up Unit, but
a print job requiring sheets was sent.

Paper jam.

Lift the release lever.

A paper jam occurred in the printer during printing.
666 Error Message
Cause
Cause
Cause
Cause
Corrective Action
1.
Lift the Release Lever and remove the paper.
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold down the Stop button
for more than a second to cancel printing, load a roll,
and then print.
(→P.108)
Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
Remove the roll and load a sheet of the type and size
of paper you have specied in the printer driver.
(→P.143)
(→P.112)
1.
Press the Stop button for a second to cancel the
job involving sheets.
2.
Choose Paper Cutting in the menu.
3.
Press the Load/Eject button and remove the roll.
4.
Load a sheet and resend the print job.
Corrective Action
1.
Lift the Release Lever and remove the jammed
paper.
(→P.147)
(→P.170)
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.