Canon imagePROGRAF iPF810 User Manual page 594

Ink Tanks
4.
Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.
5.
Make sure the Ink Lamp is lit in red.
Note
•
If the Ink Lamp is not lit in red, reload the tank.
•
Ink lamps ash when there is little ink left.
6.
Close the Ink Tank Cover.
The printer will go online or ofine.
Important
•
After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close,
some Ink Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are
fully closed.
580 Maintenance