Problems with the printing quality
Image Edges are Blurred or White Banding Occurs
The Platen suction is too strong.
The Printhead is set too high.
The type of paper specied in the printer driver does
not match the type loaded in the printer.
638 Troubleshooting
Cause
Corrective Action
Set VacuumStrngth to Weakest.
(→P.571)
Close the blue Switch on the platen so that it matches
the paper size.
(→P.639)
Lower the Printhead.
(→P.561)
Load paper of the same type as you have specied
in the printer driver.
(→P.139)
(→P.164)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.