Use Another Paper; Messages Regarding Printing Or Adjusment; Cannot Execute This Command. Use Other Paper - Canon imagePROGRAF iPF6100 User Manual

Messages regarding printing or adjusment

Messages regarding printing or adjusment

Use another paper.

The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.

Cannot execute this command. Use other paper.

The loaded paper cannot be used for color calibration. Load paper compatible with color calibration.*1 See
*1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot
be completed correctly unless the setting value matches the loaded paper.
Cannot print as specied.
Press Load/Eject and replace paper with A4/LTR (vertical) or larger
The loaded paper is too small.
Press Load/Eject and replace roll with 10 in. wide or larger roll.
The loaded paper is too small.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
704 Error Message
Cause
Cause
Cause
Cause
Cause
For automatic Printhead adjustment, we recommend
using a type of paper that you often use, other than
lm.
(→P.584)
Adjust the feed amount manually.
(→P.592)
"Paper Reference Guide ." (→P.108)
Corrective Action
Press the Load/Eject button and switch to paper A4/Letter,
vertical, or larger.
Corrective Action
Press the Load/Eject button and load a roll at least 10
inches (254 mm) wide.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.623)
2.
Clean the Printhead if the nozzles are clogged.
(→P.624)
Adjust the feed amount manually.
(→P.592)
Corrective Action
Corrective Action
Corrective Action