Stationary Output Stacker - Canon imagePROGRAF iPF810 User Manual

Printer parts

Stationary Output Stacker

a. Output Stacker
A cloth tray that catches ejected documents.
b. White tag
A point of reference for attaching the Output Stacker in the right direction.
c. Basket Arm R and Basket Arm L
Holds the Basket Rod (tag side) attached to the Output Stacker. When the Output Stacker is not
used, push it down and store it next to the Stand Leg.
d. Basket Rod (tag side) and Basket Rod (cord side)
Holds the cloth Output Stacker securely in specic positions.
e. Basket Rod
Keeps Basket Arm R and Basket Arm L at the same angle.
f. Rear Holder
Holds the middle of the Basket Rod (cord side).
(→P.21)
Note
•
The printer can be used with either a Stationary Output Stacker or a separate, mobile Wheeled Output
Stacker.
The Stationary Output Stacker is normally provided as the standard stacker, but the Wheeled Output
Stacker may be the standard stacker in some sales regions. If the Wheeled Output Stacker has been
provided as the standard stacker, the Stationary Output Stacker is not included.
For more information about the Wheeled Output Stacker, see "Wheeled Output Stacker". (→P.96)
20 Printer Parts