Accessing Hafm On The Hafm Appliance; Vnc Authentication Window; Welcome To Windows Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Setting Up the Application

Accessing HAFM on the HAFM Appliance

You can log in to HAFM located on the appliance from a browser-capable PC
connected through an Ethernet LAN segment. Use the following steps:
1. Ensure the HAFM appliance and a browser-capable PC are connected through
2. At the PC browser, enter the URL in the following format:
Figure 12: VNC Authentication window
3. Type the password and click OK. The Welcome to Windows dialog box
Note:
Figure 13: Welcome to Windows dialog box
48
an Ethernet LAN segment. At the PC, launch the browser application
(Netscape Navigator or Internet Explorer).
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address or the IP address
configured for the appliance during installation. The VNC Authentication
window displays, as shown in
displays, as shown in
The default TightVNC viewer password is password.
Figure 12.
Figure 13.
HA-Fabric Manager User Guide