Setting Up the Application
2. Choose the type of file you want to import from the Import From list.
3. Enter the path and file name in the File Name field.
Note:
to select the san*.zip file for import. Importing the rep*.zip file causes errors.
4. Click OK. A message displays, stating that imported data replaced
5. If you are sure you want to replace the data on the appliance, click OK. If you
Note:
Only one SAN can be viewed at a time. For instructions about turning on discovery,
see
"Setting Up
92
The default path is:
corresponding data on the appliance.
are importing a SAN file or a properties file, the client is logged out and the
HAFM 8 Log In dialog box displays. Log back into the application.
When discovery is on, the discovered SAN is replaced with the imported data.
Discovery" on page 69.
<Install_Home>\ClientData\san<date>\san*.zip
. Be sure
HA-Fabric Manager User Guide