Reference
Event Management
Event Management enables you to specify triggers and actions to automate tasks.
For example, you can set an event trigger to fire at a certain time and day
(everyday at noon) and associate the action of sending an e-mail message.
Event Trigger Properties
Refer to the information in this section for descriptions of the properties you can
set for event triggers.
SNMP Trap Event Properties
SNMP trap events occur when the appliance receives an SNMP trap.
Event Property
Table 28: Event Property
IP Address
Node Name
Port Name
Source
Description
Event Level
Device Property
The properties of a device in the SAN.
Table 29: Device Property
Label
Name
Device Type
Node Name
IP Address
Vendor
276
Property
Device's IP address.
Device's world-wide name.
Port's world-wide name.
The cause of the event (for example, user ID or device label).
Event description (for example, Out-of-band offline).
The severity of the event (for example, informational).
Property
Device's label, as shown on the Physical Map.
Device's name, as specified in the
Type of device (for example, HBA).
Device's world-wide name.
Device's IP address.
Device's vendor.
Description
Description
Properties
dialog box.
HA-Fabric Manager User Guide