Configuring SAN Products and Fabrics
5. Click OK.
Adding Trap Recipients
1. Choose Monitor > Trap Forwarding. The Configure Trap Forwarding
2. Click Add. The Add Trap Recipient dialog box displays, as shown in
Figure 59: Add Trap Recipient dialog box
3. Enter a description of the trap recipient in the Description field.
4. Enter the trap recipient's IP address in the IP Address field.
5. Enter the trap recipient's TCP/IP port number in the Port field.
6. Click OK.
7. Click OK.
Removing Trap Recipients
1. Choose Monitor > Trap Forwarding. The Configure Trap Forwarding
2. Highlight the recipient you want to remove in the Available Recipients table.
3. Click Remove.
4. Click OK.
112
dialog box displays, as shown in
Figure
59.
dialog box displays, as shown in
Figure
58.
Figure
58.
HA-Fabric Manager User Guide