Planning Rule Parameters - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Table 10: Planning Rule Parameters
Parameter
set rule_id
where rule
description
headline
errormssg
remedy
HA-Fabric Manager User Guide
Required
Yes
Yes
No
No
No
No
Types of Rules—There are three types of rules that you can write to evaluate
a plan:
Description
Sets the rule ID. The
rule is no loaded if this
is not specified.
Sets the actual rule. The
rule is not loaded if this
is not specified. See
"Types of Rules—There
are three types of rules
that you can write to
evaluate a plan:" on
page 181 and
"Keywords—When
writing the where rule
parameter, only certain
keywords may be
used." on page 183 for
more information.
Provides a more
detailed description of
the rule.
Provides a short
overview of the rule.
Specifies the error
message to display if
the rule is violated
during evaluation. If
this statement is not
specified, or if it is null,
a generic error
message displays.
Specifies a remedy for
the rule violation. This
text displays on the
evaluation screen.
Optional Features
Formatting
Must be a unique value,
but can be any length and
any format.
Use only the keywords
provided; otherwise the
rule fails.
Must be prepended with
an "And."
Must be enclosed within
quotation marks.
Must be prepended with
an "And."
Must be enclosed within
quotation marks.
Must be prepended with
an "And."
Must be enclosed within
quotation marks.
Must be prepended with
an "And."
Must be enclosed within
quotation marks.
181