HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 234

Information and Error Messages
Table 21: HAFM Messages (Continued)
Cannot display route.
error 9.
Cannot display route.
No active zone
enabled.
Cannot have spaces in
field.
Cannot modify a zone
set with an invalid
name. Rename zone
set and try again.
Cannot modify a zone
with an invalid name.
Rename zone and try
again.
Cannot modify
product.
Cannot perform
operation. Fabric is
unknown.
Cannot perform
operation. The list of
attached nodes is
unavailable.
234
Message
An internal error has
occurred while trying
to view routes.
You cannot show the
route through a fabric
with no active zone.
Spaces are not
allowed as part of the
entry for this field.
A zone set must have
a valid name to be
modified.
A zone must have a
valid name to be
modified.
The selected product
cannot be modified.
This message displays
if no switches in the
fabric are connected
to the HAFM
appliance.
This message displays
when attached nodes
are unavailable and
you attempt to modify
a zone or create a
new zone.
Description
Contact the next level of
support to report the problem.
Enable the default zone or
activate a zone set before
attempting to show the route.
Delete spaces from the field
entry.
Assign a valid name to the
zone set, then modify the name
through the Modify Zone Set
dialog box.
Assign a valid name to the
zone, then modify the name
through the Modify Zone Set
dialog box.
Verify the HAFM
appliance-to-product link is up.
If the link is up:
Ensure at least one
fabric-attached switch or
director has an Ethernet
connection to the HAFM
appliance and retry the
operation.
Verify an attached node is
available and retry the
operation.
Action
The HAFM appliance may
be busy.
Another Element Manager
instance may be open.
You may not have
permission to modify the
product.
Error Messages