Note:
Note:
You can remove a user group regardless of whether a user is assigned to the
group.
1. Choose SAN > Users. The HAFM 8 Server Users dialog box displays, as
2. Highlight the group you want to remove in the Groups table.
3. Click Remove located below the Groups table.
4. Click OK.
Assigning Users to Groups
Note:
You can assign users to groups to assign them permissions for features and
topology views. If you assign one user to multiple groups, the user has the user
rights specified in all the groups.
Note:
they log out and try to log in again.
1. Choose SAN > Users. The HAFM 8 Server Users dialog box displays, as
2. Highlight a user in the Users table.
3. Highlight the group(s) to which you want to assign the user in the Groups
4. Click the right arrow button. The user is assigned to the selected groups.
5. Click OK.
HA-Fabric Manager User Guide
You must be an administrator to perform this task.
After completing these steps, the user group is removed without confirmation.
shown in
Figure 17
on page 57.
You must be an administrator to perform this task.
If a user is logged in when you reassign their group, they are not affected until
shown in
Figure 17
on page 57.
table. Press CTRL and click to make multiple selections.
Setting Up the Application
67