Reverting To A Default Community String; Domain Information Dialog Box (Community Strings Tab) - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Figure 27: Domain Information dialog box (Community Strings tab)
5. Click an option in the Read field.
6. Click an option in the Write field.
7. If you chose Custom in
8. Enter the custom string in the Custom field.
9. Enter the string again in the Confirm Custom field.
10. Click OK.
11. Click OK to close the Discover Setup dialog box.

Reverting to a Default Community String

1. Choose Discover > Setup. The Discover Setup dialog box displays, as shown
2. Highlight an IP address from the Available Addresses table.
3. Click Add. The Domain Information dialog box displays, as shown in
4. Click the Community Strings tab. The Community Strings tab displays, as
5. Click Default 'public' and Default 'private'.
6. Click OK.
HA-Fabric Manager User Guide
— Choose Default 'public' to select the default string.
— Choose Custom to specify a custom string.
— Choose Default 'private' to select the default string.
— Choose Custom to specify a custom string.
step 10.
in Figure 25 on page 70.
Figure 26 on page 71.
shown in Figure 27 on page 73.
step 5 or step 6, continue to
Setting Up the Application
step 8. Otherwise, skip to
73