HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 235

Table 21: HAFM Messages (Continued)
Cannot retrieve current
SNMP configuration.
Cannot save current
SNMP configuration.
Cannot set write
authorization without
defining a community
name.
Cannot show zoning
library. No fabric
exists.
Click OK to remove all
contents from log.
Connection to
management server
lost.
Connection to
management server
lost. Click OK to exit
application.
Could not export log to
file.
HA-Fabric Manager User Guide
Message
The current SNMP
configuration could
not be retrieved.
The current SNMP
configuration could
not be saved.
An SNMP community
name has not been
configured.
You cannot show the
zoning library if no
fabric exists. You must
have identified a
switch or director to
the
for a fabric to exist.
This action deletes all
contents from the
selected log.
The connection to the
remote HAFM
appliance has been
lost.
The
at a remote
workstation lost the
network connection to
the HAFM appliance.
A log file input/output
(I/O) error occurred
and the file could not
be saved to the
specified destination.
The disk may be full or
write protected.
Description
HAFM
application
HAFM
application
Information and Error Messages
Action
Try again. If the problem
persists, contact the next level
of support.
Try again. If the problem
persists, contact the next level
of support.
Enter a valid community name
in the Configure SNMP dialog
box.
Identify an existing switch or
HAFM
director to the
application using the New
Product dialog box.
Click OK to delete the log
contents or Cancel to cancel the
operation.
Log in to the HAFM appliance
again through the HAFM Log In
dialog box.
HAFM
Re-start the application
to connect to the HAFM
appliance.
If the disk is full, use another
disk. If the disk is write
protected, change the
write-protect properties or use
another disk.
235