Restoring Data - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Setting Up the Application

Restoring Data

Backing up data takes some time. Wait about 45 minutes after making a
configuration change before restoring from the backup files to ensure that all your
changes are included in the backed up files. To restore data to the appliance
platforms, follow these instructions:
1. Reinstall the application, if necessary.
2. To restore data to the application, copy the three folders from the CD-RW
3. On the HAFM appliance, open the HAFM application.
4. Choose SAN > Import. The Import dialog box displays, as shown in
5. Choose SAN File (zip) from the Import From drop-down list.
6. Click Browse. The Browse dialog box displays.
Note:
entries. If you want to keep the data on the appliance, perform an export before
importing the new data. See
7. Select the file from the directory below and click Open.
8. Click OK on the Import dialog box. A message displays stating that imported
9. If you are sure you want to replace the data on the appliance, click OK. The
94
disk (X:\Backup\ directory) and paste them in C:\Program
Files\<Install_Home> directory. You are asked if you want to
overwrite the existing files; click Yes.
Figure 41.
Imported data replaces the corresponding data on the appliance, including log
<Install_Home>\Server\Data\Backup\bkp(date and
time)\bkp(date and time).zip
data replaces corresponding data on the appliance.
client is logged out and the HAFM 8 Log In dialog box displays. For
instructions on logging into HAFM, see
"Exporting Data" on page 89 for instructions.
"Accessing HAFM" on page 47.
HA-Fabric Manager User Guide