Configuring SAN Products and Fabrics
Procedure
To show the route for two specific ports on the end nodes, perform the following:
1. In the Product List, click the + symbol next to a switch product icon to expend
2. Right-click a node and select Show Route. The Show Route dialog box
Figure 44: Show Route dialog box
3. Select a destination port from the Destination Port table.
4. Click OK. The route between the ports displays on topology, as shown in
Figure 45: Show Route example
100
and see the attached nodes.
displays, as shown in
Figure
45.
Figure
44.
HA-Fabric Manager User Guide