Configuring Solaris Systems; Requirements; Installation Procedure - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Solaris Systems

This section describes the procedures for installing HAFM on a remote Solaris
workstation.

Requirements

The download and installation process requires the use of a workstation with the
following minimum system requirements:
Newer versions of the HAFM or Element Managers installed on the HAFM
appliance automatically download when the remote clients log in to the appliance.

Installation Procedure

To install the HAFM on a remote workstation:
1. Open a World Wide Web (WWW) browser.
2. Type the address of the HAFM appliance in the Location (or Address) field
3. On the page, click Begin Solaris Installation to begin the installation
HA-Fabric Manager User Guide
Solaris version 7.0
UltraSPARC-IIi processor
512 megabyte (MB) random access memory (RAM) memory
350 MB available disk space
Video card supporting 256 colors at 800 x 600 resolution
Network connection
Internet browser, such as Microsoft Internet Explorer (version 4.0 or later) or
Netscape Navigator (version 4.6 or later)
of the browser, then press Enter.
Obtain the HAFM appliance address from your network administrator
The HP StorageWorks HAFM page displays.
page with the Windows installation section.
process. If you have read the security agreement information and wish to
continue, click Yes. The HP High Availability Fabric Manager Available
Installers page displays, as shown in
Configuring Remote Workstations
Figure 111
Figure 112.
illustrates a partial
257