HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 173

Note:
1. Right-click a switch icon and choose Performance Graphs. The
2. Highlight a port row and click History/Events or double-click a port row.
3. Choose the check boxes next to
4. Adjust the slide-bars at the right side of the display. As you move the
5. Click Apply to All Ports if you want to apply your changes to all ports on the
6. Click OK.
Note:
means if you move a switch from one location to another, it "brings" its performance
data and thresholds with it. Additionally, if a threshold is set in one SAN file and the
same switch is discovered in a different SAN file, the threshold is defined in both files.
HA-Fabric Manager User Guide
Discovery must be turned on to view threshold values.
Performance Graph displays, as shown in
The Port Performance Graph displays, as shown in
configure both high and low usage performance warnings and critical
thresholds.
slide-bar, the percentage of utilization displays in the field associated with the
slide-bar that you are adjusting.
device.
Switch performance data and thresholds are indexed by their node name. This
Figure 89 on page 168.
Figure 91
and icons to define the boundaries to
Optional Features
on page 171.
173