Determining Status Of A Product In A Persisted Fabric; Determining The Status Of Connections In A Persisted Fabric; Product Added To Persisted Fabric; Product Removed From Persisted Fabric - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

You can also determine changes to the persisted fabric through the Fabric Log. To
display the log, perform the following:
1. Highlight a persisted fabric in the Physical Map or Product List and choose

Determining Status of a Product in a Persisted Fabric

When a product is added to a persisted fabric, it displays with a "plus" icon, as
shown in
Figure 55: Product Added to Persisted Fabric
When a product is removed from a persisted fabric, it displays with a "minus"
icon, as shown in
Figure 56: Product Removed from Persisted Fabric

Determining the Status of Connections in a Persisted Fabric

If more than one connection exists between products and all connections are
disconnected, the connections change to yellow, dashed lines. If one or some of
the connections are disconnected (but not all), the enabled connections display as
black lines and the disabled connections display as yellow, dashed lines with an
interswitch link (ISL) alert, as shown in
To remove an ISL alert, perform the following:
1. Right-click the connection and choose Clear ISL Alert(s). If an ISL is added,
HA-Fabric Manager User Guide
Monitor > Logs > Fabric Log. For more details on the Fabric Log, see
"Event Monitoring" on page 114.
Figure 55.
Figure
the ISL displays as a black line.
56.
Figure
Configuring SAN Products and Fabrics
57.
109