HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 238

Information and Error Messages
Table 21: HAFM Messages (Continued)
Error transferring files
< message >.
Fabric Log will be lost
once the fabric
unpersists. Do you
want to continue?
Fabric member could
not be found.
Fabric not persisted.
Field cannot be blank.
File transfer aborted.
HAFM error <error
number 1 through 8 >.
238
Message
An error occurred
while transferring files
from the PC hard drive
to the
application. The
message varies,
depending on the
problem.
When you unpersist a
fabric, the
corresponding fabric
log is deleted.
A fabric member does
not exist when the
application prepared
to find a route, find a
route node, or gather
route information on
that fabric member.
You attempted to
refresh or clear the
log, after a fabric was
unpersisted. When
you unpersist a fabric,
the corresponding
fabric log is deleted.
The data field requires
an entry and cannot
be left blank.
You aborted the file
transfer process.
The
encountered an
internal error (1
through 8 inclusive)
and cannot continue
operation.
Description
HAFM
HAFM
application
Action
Try the file transfer operation
again. If the problem persists,
contact the next level of
support.
Click Yes to unpersist the fabric
or No to cancel the operation.
Ensure the product is
incorporated into the fabric
and retry the operation. If the
problem persists, contact the
next level of support.
Click OK to continue. Ensure
the fabric is persisted before
attempting to refresh or clear
the Fabric Log.
Enter appropriate information
in the data field.
Verify the file transfer is to be
aborted, then click OK to
continue.
Contact the next level of
support to report the problem.
Error Messages