Configuring Windows Systems; Requirements; Installation Procedure - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Remote Workstations

Configuring Windows Systems

This section describes the procedures for installing HAFM on a remote
workstation running Windows 2000, Windows NT, or Windows XP.

Requirements

The download and installation process requires the use of a personal computer
(PC) with the following minimum system requirements:
Newer versions of the High Availability Fabric Manager or Element Managers
installed on the HAFM appliance automatically download when the remote clients
log in to the appliance.

Installation Procedure

To install the HAFM on a remote workstation:
1. Open a World Wide Web (WWW) browser.
2. Type the address of the HAFM appliance in the Location (or Address) box
252
Operating system (one of the following):
— Windows 2000 Professional (with service pack 3)
— Windows NT 4.0 (with service pack 6a)
— Windows XP (with service pack 1a)
1 gigahertz (GHz) Pentium III processor
512 megabyte (MB) random access memory (RAM) memory
350 MB available disk space
Video card supporting 256 colors at 800 x 600 resolution
Ethernet network adapter
Java-enabled Internet browser, such as Microsoft Internet Explorer (version
4.0 or later) or Netscape Navigator (version 4.6 or later)
on the browser, then press Enter.
Obtain the HAFM appliance address from your network administrator
The HP StorageWorks HAFM remote client installation screen displays.
Figure 111 shows the upper portion of this page.
HA-Fabric Manager User Guide