Table 16: Discovery Problems and Resolutions (Continued)
Broadcast request blocked
by routers.
HA-Fabric Manager User Guide
Problem
Resolution
Resolution 1: If you know the IP addresses and the
addresses are not in the Available Addresses
pane:
1. Choose Discover > Setup.
2. Click Add.
3. Enter data in the dialog box.
4. Click OK.
5. Repeat steps
step 1
your addresses are available.
6. Select the IP addresses you would like to
discover in the Available Addresses pane.
7.
Click the
button to move your choices to the
Selected Individual Addresses pane.
8. Click OK.
Resolution 2: If you know the IP addresses and the
addresses are listed in the Available Addresses
pane:
1. Choose Discover > Setup.
2. Select the IP addresses you would like to
discover in the Available Addresses pane.
3. Click the
button to move your choices to the
Selected Individual Addresses pane.
4. Click OK.
Resolution 3: This method significantly increases
your discovery time.
If you don't know the specific IP addresses:
1. Choose Discover > Setup.
2. Click on the Method column for the selected
subnet in the Selected Subnets pane and
choose Sweep.
3. Click OK.
Troubleshooting
through
step 4
until all
223