Using Event Notification Features; Configuring Email Notification; Email Notification Setup Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Monitoring SAN Products

Using Event Notification Features

The application records the SAN events in the Master Log. You can configure the
application to send event notifications to e-mail addresses at certain time
intervals. This is a convenient way to keep track of events that occur on the SAN.
You can also configure products to "call home" for certain events, notifying the
service center of product problems.

Configuring Email Notification

You can configure the application to send notification of events to users.
1. Choose Monitor > Event Notification > Email. The Email Event
Figure 62: Email Notification Setup dialog box
2. Choose Enable Email Event Notification to enable e-mail notification.
3. Enter the IP address or the name of the SMTP mail server in the E-mail
4. Enter the recipient's e-mail address in the Reply field.
5. Click Test Email to test the e-mail server. A message displays indicating if
6. Enter the length of time the application should wait between notifications in
118
Notification Setup dialog box displays, as shown in
Server field.
the server was found.
If the server was not found, verify that the server address was entered
correctly and that the server is running.
the Interval field.
Notifications are combined into a single e-mail and sent at each interval
setting. An interval setting of zero causes notifications to be sent immediately.
Figure 62.
HA-Fabric Manager User Guide