Deleting a Rule
1. Click the Event Management tab on the main window. The Event
2. Choose the rule you want to delete from the Rules table.
Note:
3. Click Delete. A confirmation message displays a list of the rules to be deleted.
4. Verify the list of rules and click Yes.
Activating Rules
Activating an Existing Rule
1. Click the Event Management tab on the main window. The Event
2. Choose the rule you want to activate from the Rules table.
Note:
3. Click Activate. A confirmation dialog box displays.
4. Click Yes. Each active rule displays a green flag in the Active column.
Activating a New Rule
1. Verify that the Active check box on the Add Rule or Edit Rule dialog box is
2. Click OK. The rule is highlighted in the Rules table and displays a green flag
HA-Fabric Manager User Guide
Management tab displays, as shown in
To select a non-contiguous set of rules, press CTRL and click each rule.
Management tab displays, as shown in
To select a non-contiguous set of rules, press CTRL and click each rule.
selected.
in the Active column.
Figure 69
on page 133.
Figure 69
on page 133.
Optional Features
147