Status Bar - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Introduction and General Information

Status Bar

The status bar as shown in
The status bar provides a variety of information about the SAN and the
application. The icons on the status bar may change to reflect different
information.
Note:
2 4
1 3 5
1
2
3
4
5
Figure 9: Status Bar
40
Depending on your configuration, some status bar icons may not display.
6
7
Server Status
Connection Status
Product Status
Fabric Status
Attention Indicator
Server Status—Displays local Server status.
Connection Status—Displays the appliance-client connection status.
Product Status—Displays the most degraded status of all devices in the
SAN. For example, if all devices are operational except one (which is
degraded), the Product Status displays as degraded. Click this icon to open the
Product State Log. See
page 98 for more information.
Fabric Status—Displays the state of the fabric that is least operational, based
on ISL status.
Attention Indicator—Displays when at least one HP product in the SAN has
an attention indicator. Click the icon to open the Service Request dialog box,
which lists all HP switches and directors that need attention.
Call-Home Status—Displays if the Call-Home service has been enabled. If
Call-Home has been enabled on all managed HP switches and on the HAFM
application, the icon displays as enabled. If Call-Home is disabled on any one
of the HP switches or on the HAFM application, the icon displays as disabled.
Figure 9, is located at the bottom of the main window.
8
9
Call-Home Status
6
Server Name
7
Client Count
8
User's Access Level
9
"Determining a Product's Operational Status" on
HA-Fabric Manager User Guide