Changing A Fabric's Properties; Fabric Properties Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Fw v06.xx/hafm sw v08.02.00 hp storageworks ha-fabric manager user guide (aa-rs2ce-te, july 2004)
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Service manual (322 pages) ,
- User manual (300 pages) ,
- Reference manual (214 pages)
Table of Contents
Advertisement
Configuring SAN Products and Fabrics
2. Review the source and destination ports, as well as route details.
3. Click Close.
Changing a Fabric's Properties
To view and change a fabric's properties, perform the following:
1. Right-click a fabric icon or the background of an expanded fabric and choose
Figure 47: Fabric Properties dialog box
2. View the fabric's information and edit the nickname, if desired.
Note:
3. Click OK.
102
Properties. The fabric's Properties dialog box displays, as shown in
Figure
47.
Once you assign a nickname, you cannot delete it and leave it blank.
HA-Fabric Manager User Guide
Advertisement
Table of Contents
