Hiding Routes Between Two End-Products; Viewing Properties Of Routes Between Two End-Products; Route Properties Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Hiding Routes Between Two End-Products

Note:
products.
You can use the Hide Route feature to hide routes that Fibre Channel frames must
take between two end-products in a multiswitch fabric. You must show routes
before you can hide routes. See
on page 99 for instructions on showing routes.
To hide the route, perform the following:
1. Right-click the route (line between end-nodes) or the fabric that includes the

Viewing Properties of Routes Between Two End-Products

To view the properties of a route, perform the following:
1. Right-click the route and choose Properties. The Route Properties dialog box
Figure 46: Route Properties dialog box
HA-Fabric Manager User Guide
This feature is only available for fabrics consisting solely of HP M-series
route you want to hide and choose Hide Route.
displays, as shown in
"Showing Routes Between Two
Figure 46.
Configuring SAN Products and Fabrics
End-Products"
101