HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 242

Information and Error Messages
Table 21: HAFM Messages (Continued)
No management
server specified.
No nickname selected.
No Element Managers
installed.
No routing
information available.
No user selected.
No zone member
selected.
No zone selected.
No zone selected or
zone no longer exists.
No zone set active.
No zone set selected.
242
Message
An HAFM appliance is
not defined to the
HAFM
No nickname was
selected when the
command was
attempted.
No director or switch
Element Manager is
installed on this
workstation.
No information is
available for the route
selected.
A user was not
selected when the
command was
attempted.
A zoning operation
was attempted without
a zone member
selected.
A zoning operation
was attempted without
a zone selected.
A zoning operation
was attempted without
a zone selected, or the
zone selected no
longer exists in the
fabric.
A zone set cannot be
deactivated if there
are no active zones.
A zoning operation
was attempted without
a zone set selected.
Description
At the HAFM 8 Log In dialog
box, type an appliance name
application. in the Server Name field and
click Login.
Choose a nickname and try
again.
Install the appropriate Element
Manager to this workstation.
Choose a different route and
try the operation again.
Choose a user and try again.
Choose a zone member and try
the operation again.
Choose a zone and try the
operation again.
Choose a zone and try the
operation again.
Informational message
only—no action is required.
Choose a zone set and try the
operation again.
Action
Error Messages