Setting Up the Application
Managing User Groups
This section provides an overview of user groups and their access levels and
describes how to set up a user group.
About User Groups and Access Levels
A user with administrative privileges ("System Administrator") can assign users
to user groups. Four pre-configured user groups are available with the application;
however, System Administrator users can also create user groups manually. See
"Creating a User
Table 4: User Groups and Access Levels
System
Administrator
Maintenance
Operator
Product
Administrator
Creating a User Group
Note:
64
Group" on page 64 for instructions.
User Group
Read/write access for all features: user can view and edit
information; all functions are enabled and allowed.
Read/write access for Call Home Event Notification, Device
Maintenance, and Email Event Notification Setup: user can
view and edit this information.
Read-only access for all other features: user can only view this
information; editing and configuration capabilities are
disabled.
Read/write access for Device Operation: user can view and
edit this information.
Read-only access for all other features: user can only view
information; editing and configuration capabilities are
disabled.
Read/write access for Device Administration: user can view
and edit this information.
Read-only access for all other features: user can only view
information; editing and configuration capabilities are
disabled.
You must be an administrator to perform this task.
Description
HA-Fabric Manager User Guide