Problems With Discovery; Discovery Problems And Resolutions - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Troubleshooting

Problems with Discovery

Table 16
Table 16: Discovery Problems and Resolutions
Discovery is turned off.
Discovered devices are not
being displayed.
222
describes possible problems with discovery and suggested resolutions.
Problem Resolution
Choose Discover > On.
To correctly discover all SAN devices, specify each
device in the Out-of-Band dialog box, either by the
individual IP address or by subnet.
1. Choose Discover > Setup.
2. Add, change, and remove IP addresses, as
necessary. See "Configuring IP Addresses and
Community Strings" on page 70 for
instructions.
3. Select IP addresses from the Available
Addresses table and add them to the Selected
Subnets or Selected Individual Addresses
tables by clicking the
addresses to the Selected Subnets table,
choose a Method (Broadcast or Sweep).
4. Click OK.
Ensure that you've selected to view the fabric that
includes the discovered devices.
Ensure that only one copy of the application is
being used to monitor and manage the same
devices in a subnet.
buttons. If you add
HA-Fabric Manager User Guide