HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 243

Table 21: HAFM Messages (Continued)
No zone set selected
or zone set no longer
exists.
Only attached nodes
can be displayed in
this mode.
Password and
confirmation don't
match.
Remote sessions are
not allowed from this
network address.
Remote session
support has been
disabled.
Resource is
unavailable.
Route data corrupted.
Route request timeout.
HA-Fabric Manager User Guide
Message
A zoning operation
was attempted without
a zone set selected, or
the zone set you
selected no longer
exists in the fabric.
You cannot display
unused ports when
adding ports by World
Wide Name.
Entries in the
password field and
confirmation password
field do not match. The
entries are case
sensitive and must be
the same.
Only IP addresses of
remote workstations
specified at the Remote
Access dialog box are
allowed to connect to
the HAFM appliance.
The connection
between the specified
remote workstation
and the HAFM
appliance was
disallowed.
The specified
operation cannot be
performed because the
product is unavailable.
The information for
this route is corrupt.
The Show Route
request timed out.
Description
Choose a zone set and try the
operation again.
Change the add criteria to Add
by Port.
Enter the password and
confirmation password again.
Consult with the customer's
network administrator to
determine if the IP address is to
be configured for remote
sessions.
Consult with the customer's
network administrator to
determine if the workstation
entry should be modified at the
Remote Access dialog box.
Verify the HAFM
appliance-to-product link is up.
If the link is up, the HAFM
appliance may be busy. Try the
operation again later.
Try the operation again. If the
problem persists, contact the
next level of support.
Try the operation again. If the
problem persists, contact the
next level of support.
Information and Error Messages
Action
243