Adding Switches To The Fabric Binding Membership; Santegrity Feature Message; Add Detached Switch Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring SAN Products and Fabrics
Figure 50: SANtegrity feature message
3. Click OK.
4. Click OK.

Adding Switches to the Fabric Binding Membership

Once you have enabled Fabric Binding (see
page 105), you can add and remove switches from the membership list.
1. Add switches to the selected fabric's Fabric Membership List (FML) by
2. Click Add Detached Switch to add a switch that does not have physical
Figure 51: Add Detached Switch dialog box
106
or
If you want to add switches to the membership list, see
the Fabric Binding Membership" on page 106 for instructions.
selecting the switches from the Available Switches table and clicking the
button to move the switches to the Membership List table.
connection to the fabric. The Add Detached Switch dialog box displays, as
shown in Figure 51.
a. Enter the domain ID in the Domain ID field.
b. Enter the node World Wide Name in the Node WWN field.
c. Click OK.
"Adding Switches to
"Enabling Fabric Binding" on
HA-Fabric Manager User Guide