Activate Zone Set Dialog Box; Activate Zone Set Confirmation Message - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Zoning
4. Choose a zone set from the Zone Sets list.
5. Click Activate. The Activate Zone Set dialog box displays, as shown in
Figure 103: Activate Zone Set dialog box
6. Click OK. A Confirmation message displays, as shown in
Figure 104: Activate Zone Set confirmation message
7. Click the Active Zone Set tab to view the active zone set and all zones within
198
Figure 103.
The Activate Zone Set dialog box displays the names of the fabric, the current
active zone set, and the new active zone set. It also lists the number of
affected devices and a summary of zone and zone member changed. Verify
the information in this dialog box before clicking OK.
that zone set in the future.
If the zoning method is not supported, verify that the switch is being managed
properly.
Figure 104.
HA-Fabric Manager User Guide