Hafm Appliance; Record Or Verify Hafm Appliance Restore Information; Enabling Hafm To Manage The Director - HP StorageWorks Director 2/140 Installation Manual

HAFM Appliance

To run HAFM software, you must set up and configure the HAFM appliance.
Refer to the HP StorageWorks HA-Fabric Manager Appliance Installation Guide
for instructions on:

Record or Verify HAFM Appliance Restore Information

Configuration information must be recorded to restore the HAFM appliance in
case of hard drive failure. The Windows 2000 operating system and the HAFM
and director Element Manager must also be restored. Refer to the HP
StorageWorks Director 2/140 Service Manual for instructions.
To record or verify HAFM appliance configuration information, refer to the HP
StorageWorks HA-Fabric Manager Appliance Installation Guide for instructions.

Enabling HAFM to Manage the Director

To manage a new director, it must be recognized by the HAFM application.
Follow these steps to enable HAFM to recognize a new director:
1. At the HAFM application, choose Discover > Setup. The Discover Setup
Director 2/140 Installation Guide
Setting up the HAFM appliance
Connecting the HAFM appliance to the LAN
Configuring the network addresses and passwords for the HAFM appliance
Setting HAFM appliance date and time
Configuring and enabling event notification features
Creating HAFM user names and passwords
dialog box displays, as shown in
Installing and Configuring the Director
Figure 22.
61