Troubleshooting
Problems with Addresses
Table 18
Table 18: Address Problems and Resolutions
No subnets or addresses
selected.
Wrong IP addresses
selected.
Wrong community strings
are selected.
226
describes possible problems with addresses and suggested resolutions.
Problem
Resolution
1. Choose Discover > Setup.
2. Click on the subnet or individual address you
would like to discover in the Available
Addresses pane.
3. Click the
button to move your choice to the
Selected Subnets pane, or to the Selected
Individual Addresses pane.
4. Click OK.
1. Choose Discover > Setup.
2. Verify that the IP addresses in the Selected
Subnets and Selected Individual Addresses
panes are the correct current addresses for the
SAN.
3. Click OK.
1. Choose Discover > Setup.
2. Select an IP address.
3. Click Change.
4. Select the desired community strings.
5. Click OK.
HA-Fabric Manager User Guide