Deactivating Rules; Deactivating An Existing Rule; Deactivating A New Rule; Turning The Event Management Feature On Or Off - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Optional Features

Deactivating Rules

Deactivating an Existing Rule

1. Click the Event Management tab on the main window. The Event
2. Choose the rule you want to deactivate from the Rules table.
Note:
Note:
3. Click Deactivate. A confirmation dialog box displays.
4. Click Yes. The green flag disappears from the Active column.

Deactivating a New Rule

1. Verify that the Active check box on the Add Rule or Edit Rule dialog box is
2. Click OK. The Active column does NOT display a green flag.

Turning the Event Management Feature On or Off

1. Click the Event Management tab on the main window. The Event
2. Click On or Off in the top right corner of the page.
148
Management tab displays, as shown in
To select a non-contiguous set of rules, press CTRL and click each rule.
All active rules are marked with green flags.
not selected.
Management tab displays, as shown in
Figure 69 on page 133.
Figure 69 on page 133.
HA-Fabric Manager User Guide