Changing A User Account; Add User Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Setting Up the Application
Perform the following to add a user:
1. Choose SAN > Users. The HAFM 8 Server Users dialog box displays, as
2. Click Add. The Add User dialog box displays, as shown
Figure 18: Add User dialog box
3. Enter the name in the Name field.
4. Enter the users' email addresses in the Email Address field, separating
5. Click the Enable check box to enable e-mail notification for the user.
6. Click the Filter link to specify the event types for which to send e-mail
7. Enter the user name in the User ID field.
8. Enter the user's password in the Password field.
9. Enter the password again in the Retype Password field.
10. Click OK. The new user displays on the HAFM 8 Server Users dialog box.
11. Click OK to close the HAFM 8 Server Users dialog box.

Changing a User Account

Note:
58
shown in Figure 17.
multiple addresses with a semicolon.
A message may display stating that you must enable event notification for the
SAN. Click Yes.
notification to this user. See
page 60 for detailed instructions.
You must be an administrator to perform this task.
"Filtering Event Notifications for a
Figure 18.
User" on
HA-Fabric Manager User Guide