Specifying A Message Action - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

6. Enter a description in the Description parameter's value.
7. To insert a macro for values from the trigger's content, perform the following:
8. Click Add.

Specifying a Message Action

You can configure the application to display a pop-up message on all open clients
when the specified trigger is fired. You can choose to display either informational,
warning, or fatal icons in the message. The title bar displays the rule number, rule
name, and "message." For example, "Rule 23 Switch Offline Message." The time
and date are automatically inserted and multiple messages display in a single
pop-up window.
Note:
Triggers" on page 128 for instructions.
1. Click the Event Management tab on the main window. The Event
2. Click New. The Add Rule dialog box displays, as shown in
3. Choose Message from the Actions list at the bottom left side of the dialog
HA-Fabric Manager User Guide
a. Click in the Value column.
b. Right-click and choose an argument from the menu.
Before specifying an action, you should specify the rule's triggers. See
Management tab displays, as shown in
page 134.
box. The Message information displays, as shown in
Figure 69 on page 133.
Figure
Optional Features
"About
Figure 70 on
77.
143