Status Bar Status Indicator - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Monitoring and Managing the Switch

Status Bar Status Indicator

The status bar displays a colored status symbol that indicates the overall operating
status of the switch unit. The operating status depends on hardware component
failures, which are indicated by status symbols that display over component
graphics in the Hardware View. Refer to
meanings of status symbols in the status bar.
The status bar indicates the switch operating status based on component failures.
For example, for a single port failure, a blinking red and yellow diamond displays
on the port connector in the Hardware View. At the same time, a yellow triangle
displays in the status bar to indicate a degraded switch. However, if a blinking red
and yellow diamond displays over both power supplies, the status bar displays a
red and yellow diamond, indicating a failure that requires immediate attention.
60
Link Timeout
The network connection that was established between the switch and HAFM
server has been lost. Check the IP addresses, the Ethernet LAN physical
connection between the switch and HAFM server, IP addresses, and other
network components.
Protocol Mismatch
The switch and the HAFM server are not at compatible software release
levels. Update the HAFM software version.
Duplicate Session
A link has previously been established between the switch and another
instance of the HAFM server. Connect to the previously established HAFM
server from the HAFM login screen.
Unknown Network Address
The address defined for the switch in the HAFM could not be found in the
domain name server (DNS). Either the name was mistyped when the switch
was added to the HAFM, or the name was not available from the DNS. Check
the network IP address for the switch definition in the HAFM by
right-clicking the product icon and selecting Properties. The IP address
displays in the Network Address field.
Incorrect Product Type
The product at the configured network address is not a switch. Verify address,
configuration, and product type.
"Hardware View" on page 58 for the
Edge Switch 2/24 Product Manager User Guide