Anchoring Or Floating The Minimap; Floating The Minimap; Anchoring The Minimap; Resizing The Minimap - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Anchoring or floating the Minimap

You can anchor or float the Minimap to customize your main window.

Floating the Minimap

To float the Minimap and view it in a separate window, click the Detach button in the upper
right-hand corner of the Minimap.

Anchoring the Minimap

To return the Minimap to its original location on the main window, do one of the following:
Click Attach in the upper right-hand corner of the Minimap.
•
Click Close in the upper right-hand corner of the Minimap.
•
• Click the logo in the upper left-hand corner of the Minimap and select Close (ALT + F4).

Resizing the Minimap

On an anchored Minimap, place the cursor on the left border of the Minimap until a
double-pointed arrow displays. Click and drag the adjoining divider.
On a floating Minimap, place the cursor on a border of the Minimap until a double-pointed arrow
displays. Click and drag to change the window size.

Status bar

The status bar,
your cursor on a status bar icon to for information about the status displayed. The icons are:
• Server Status—Displays local appliance status.
• Connection Status—Displays the appliance-Client connection status.
• Product Status—Displays the most degraded status of all devices in the SAN. For example, if all
devices are operational except one (which is degraded), the Product Status will display as
degraded. Click this button to open the Product State Log. Refer to
state" on page 66 for more information.
• Fabric Status—Displays the state of the fabric that is least operational, based on ISL status. The
possible states are:
• operational
• unknown
• degraded
• failed.
Select a product or fabric from the Physical Map or Product List and click this button to open the
related Fabric Log (only available for persisted fabrics). Refer to
page 89 for more information.
• Attention Indicator—This icon displays when at least one HP product in the SAN has an
attention indicator. Click the icon to open the Service Request dialog box, which lists all HP
switches and directors that need attention.
• Call Home Status—Displays if the Call Home service has been enabled. If Call Home has been
enabled on all managed HP switches and on the management application, the icon will appear
30 Using the HAFM application
(Figure 4 9) provides status information about the SAN and the application. Place
"Determining the discovery
"Monitoring events" on