Ipv6 Section; Ipx/Spx Protocol Information - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Table 8-8 IPv4 Section (continued)
Message

IPv6 section

The following table includes items displayed under the IPv6 section of the configuration page.
Table 8-9 IPv6
Message
STATUS
LINK-LOCAL
STATELESS
DHCPV6
MANUAL

IPX/SPX protocol information

Information in this section of the HP Jetdirect configuration page is described in
configuration information on page
on page 143.
Table 8-10 IPX/SPX
Message
STATUS
140 Chapter 8 HP Jetdirect configuration pages
Description
from session to session. Apple Bonjour displays this service. The default service name
is the printer model and the LAN hardware (MAC) address.
Section
Description
Current TCP/IPv6 status.
READY
DISABLED
INITIALIZING
through TFTP. Additional status message might be displayed.
An error code and message is displayed if the print server is not ready. For more
information, see
IPv6 link local address configured on the print server.
Not Configured
IPv6 stateless addresses configured on the print server.
Not Configured
IPv6 stateful address configured by a DHCPv6 server.
Not Configured
IPv6 address manually configured on the print server, using the printer control panel or
the embedded Web server.
Not Configured
140. For error messages, see
configuration information
Description
Current IPX/SPX protocol status.
READY
DISABLED
INITIALIZING
might also displayed.
Print server is awaiting data.
Manually disabled.
Searching for the BOOTP server, or trying to get the configuration file
Table 8-14 Error messages on page
Address is not set.
Address is not set.
Address is not set.
Address is not set.
Print server is awaiting data.
Manually disabled.
Registering the node address or name. An additional status message
143.
Table 8-10 IPX/SPX
Table 8-14 Error messages
ENWW